Your One-Stop Solution For Cable & Wire Accessories!

RoHS Compliant Cables & Wires
Flexible Data and Computer Cables


Contact Us About Us  
 
LinkedIn Facebook Twitter Hi Tech Controls Blog google +
Cables & WiresEnclosures (Plastic & Metal)Pneumatic ComponentsLiquid Tight Strain Relief FittingsCircular ConnectorsConduit System (Tubing, Fittings, etc.)Accessories & Adapters, Reducers, Enlargers
 
easyquote
*E-mail
*Name
*Company
*Phone
*State
*Zip Code
*Country
Please answer the security question:
3+2=
(*) Required Fields
Catalogs / Samples, Full Quote & Contact Information
303-680-5159
1-800-677-8942
dropdownbox
PDF Printable PDF

Data & Computer Cable: JE-LiYCY

Bd Si Industry-Electronic Cable According to DIN VDE 0815

Hi-Tech Controls, Inc, European wires and cables

JE-LiYCY Bd Si Industry-Electronic Cable according to DIN VDE 0815, Data cable, Hi-Tech Controls,
Part-No. Description & No. Conductors x cross-sec. mm2 Outer
Diameter
mm
Copper Weight
kg/km
Weight
ca. kg/km
AWG
48510 JE-LIYCY 2x2x0.5 gray   6.9 51.0 94.0 20
48511 JE-LIYCY 4x2x0.5 gray 9.2 87.0 154.0 20
48512 JE-LIYCY 8X2X0.5 gray 13.8 144.0 259.0 20
48513 JE-LIYCY 12X2X0.5 gray 14.6 196.0 340.0 20
48514 JE-LIYCY 16X2X0.5 gray 15.9 249.0 431.0 20
48515 JE-LIYCY 20X2X0.5 gray 17.4 299.0 494.0 20
48516 JE-LIYCY 24X2X0.5 gray 19.4 348.0 604.0 20
48517 JE-LIYCY 32X2X0.5 gray 24.9 444.0 737.0 20
48518 JE-LIYCY 40X2X0.5 gray 25.2 537.0 844.0 20
48529 JE-LIYCY 2x2x0.5 blue   6.9 51.0 94.0 20
48530 JE-LIYCY 4x2x0.5 blue 9.2 87.0 154.0 20
48531 JE-LIYCY 8x2x0.5 blue 13.8 144.0 259.0 20
48532 JE-LIYCY 12x2x0.5 blue 14.6 196.0 340.0 20
48533 JE-LIYCY 16X2X0.5 blue 15.9 249.0 431.0 20
48534 JE-LIYCY 20x2x0.5 blue 17.4 299.0 494.0 20
48535 JE-LIYCY 24x2x0.5 blue 19.4 348.0 604.0 20
48536 JE-LIYCY 32x2x0.5 blue 24.9 444.0 737.0 20
48537 JE-LIYCY 40x2x0.5 blue 25.2 537.0 844.0 20
Technical Data
  • Special PVC conductor insulation to DIN VDE 0815/DIN 57815
  • Conductor Resistance at 20°C/68°F
    39.2 Ohm/km
  • Temperature Range
    Flexing
    -5°C to +50°C (+23°F to +122°F)
    Fixed Installation
    -30°C to +70°C (-22°F to +158°F)
  • Nominal Voltage 225 V
  • Test Voltage
    Conductor/conductor 500 V
    Conductor/shield 2000 V
  • Insulation Resistance
    Min. 100 MOhm x km
  • Mutual Capacitance max. 100 pF/m
    (The value can exceed of 20% by cables up to 4 pairs)
  • Capacitance Unbalance
    Max. 200 pF/100 m
  • Inductance approx. 0.70 mH/km
  • Attenuation at 800 Hz
    Approx. 1.1 dB/km
  • Radiation Resistance
    Up to 80x106 cJ/kg (up to 80 Mrad)
  • Minimum Bending Radius
    Stationary approx. 5x cable Ø
Approvals
RoHSCE VDE
Cable Construction  
  • Bare copper strands 7x0.30 mm
  • Special PVC conductor insulation YI3, to DIN VDE 0207 part 4
  • Color coded to DIN VDE 0815
  • Conductors stranded in pairs with optimal lay-length
  • 4 pairs laid up to a unit
  • Units stranded in layer
  • Polyester foil wrap
  • Bare or tinned copper wire braided, 0.2 mm Ø shielding, approx. 85% coverage
  • Special PVC outer jacket YM1, to DIN VDE 0207 part 5
  • Color: Gray (RAL 7032) or Blue (RAL 5015)
  • With blue outer jacket for hazardous areas to hazard type -i- for intrinsically safe installation according to DIN EN 60079-14 and IEC 60079-14 section 12.2.2 (VDE 0165 part 1)
Application  
This cable is especially suited for transmission of signals and measurements in the fields of electronics and for data transmission in computers. Suitable for flexing and fixed installation in dry and moist environments in and under plaster as well as in the open for fixed installation on outer walls of buildings.
These cables are not allowed for purposes of high current and power installation.
CE Approval = The product is conformed with the EC Low-Voltage Directive 73/23/EEC and 93/68/EEC.
Properties  
  • PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
  • Features suitable for cut-clamp technics
  • The materials used in manufacture are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers 
Note  
  • AWG sizes are approximate equivalent values. The actual cross-section is in mm².
  • Also available in a halogen-free version.
    (see also content "Halogen-free Security Cables and Wires")
Cable Accessories  
  • Coming Soon!
Cable Technical Data Construction and ApplicationProperties and Note Accessories
quote
Items For Quote

   
quote
box
Sealcon is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-677-8942 / 303-680-5159 FAX: 303-680-5344
Valid XHTML 1.0 Transitional
To Top of Page Top of Page

Copyright © 2018 Hi-Tech Controls Inc. All Rights Reserved
|Cables: Domestic & International|Enclosures (Plastic & Metal)|Liquid Tight Strain Relief Fittings & Accessories|
|Circular Connectors|Conduit System|Camozzi Pneumatics|Cable Index|Enclosure Index|Search|
|Media|Site Map|Company Overview|Contact|Privacy Policy|Copyright Notice|