Halogen-Free Security Cable:
NHXCH-FE 180/E 90

• Bare copper conductor, solid or stranded, to DIN VDE 0295 cl. 1 and cl. 2, BS 6360 cl. 1 or 2, IEC 60228 cl. 1 or cl. 2, HD 383
• Double conductor insulation of mica tape and cross-linked polymer HI1, to DIN VDE 0207 part 23
• Each single conductor covering with flame resistant glass-fiber tape
• Color coding of conductors according to DIN VDE 0293-308
• Conductors stranded in layer
• Conductor wire shielding with helix of copper tape
• Bare copper wire shielding with helix of copper tape
• Outer jacket: Orange, polyolefin compound HM4, to DIN VDE 0207 part 24
• LS0H = Low Smoke Zero Halogen-Free

Tests

• Flame test to VDE 0482 part 266-2, BS 4066 part 3 / DIN EN 50266-2 / IEC 60332-3 (equivalent DIN VDE 0472 part 804 test method C)
• Corrosiveness of combustion gases according to VDE 0482 part 267 / DIN EN 50267-2-2 / IEC 60754-2 (equivalent DIN VDE 0472 part 813)
• Halogen-free according to VDE 0482 part 267 / DIN EN 50267-2-1 / IEC 60754-1 (equivalent DIN VDE 0472 part 815)
• Smoke density according to VDE 0482 part 1034-1+2 / IEC 61034-1+2 / DIN EN 61034-1+2 / BS 7622 part 1+2 (equivalent DIN VDE 0472 part 816)
• Insulation integrity under flame propagation to VDE 0472 part 814 IEC 60331
• Burning behavior in fire (functionality) of the complete cable system to DIN 4102 part 12 (90 minutes)

• Halogen-free; no evolution of corrosive and toxic gases
• Flame retardant
• Hardly flammable
• Self-extinguished and fire resistant
• No flame propagation, therefore security from fire
• Low smoke density, no darkening of emergency exits without hindering the fire extinguishing works
• Toxicologically harmless
• No self-ignition
• Maintenance of functionality during the increased current load
• FE 180: Insulation integrity for 180 minutes. Tests to DIN VDE 0472 part 814 IEC 60331.
  Insulation integrity under direct flame propagation for the test period of 180 minutes.
• E 90: Functionality of electrical cable systems for minimum 90 minutes. Test method to DIN 4102 part 12. This fulfils the demands of technical guide lines for fire protection (supplement 1 to DIN VDE 0108 part 1).
  The functionality for 90 minutes assures the functional performance of water-pressure-rising stations for the supply to avoid smoke and heat in safety-stairs and inner rooms, ladder shafts and engine rooms for fire brigade lifts, emergency lifts for sickbeds in hospitals and the fire brigade lifts.
  

• RE = round conductor, multiple-wire
  RM = round conductor, single-wire

• Coming Soon!