Composite Right Angle Flow Control Valves - BSP/Metric
Composite Right Angle Flow Control Valves
Meter In, Meter Out, Needle Orifice G1/8, G1/4, G3/8, G1/2,
Banjo flow controllers
Nominal diameters Ø 2 - 3.8 - 5.8 - 8 mm
The Meter In, Meter Out, Needle Orifice flow
controllers, series TMCU, TMVU, TMCO have been designed
to offer a solution with reduced overall dimensions in combination
with higher flow rate characteristics.
Their construction allows an easy assembly on cylinders and
valves and offers the possibility of locking the regulation
screw once it has been set. The flow regulation range which
is extremely wide and gradual has been optimized further,
allowing a very accurate flow regulation over the whole
Meter In, Meter Out, Needle Orifice flow controlle
OT58 Nickel Plated Brass Threads and Collet - Technopolymer (Glass-Reinforced Nylon® 66 Resin) - BUNA-N Seals, PTFE thread
by male thread
G1/8 , G1/4, G3/8, G1/2
in any position (spot face o-ring thread seal)
0 - 60°C (with dry air -20°C) (32°F - 140°F, with dry air -4°F)
*If lubricated air is used, it is recommended to use ISOV G32 oil.
Once applied the lubrication should never be interrupted.
0.5 - 10 bar (7.25 - 145 psi)
6 bar (87 psi)
Tube 4 Ø2 mm (.079") - Tube 6 Ø3.8 mm (.150") - Tube 8 Ø5.8 mm (.228") - Tube 10 and 12 Ø8 mm (.315")
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-677-8942 / 303-680-5159 FAX: 303-680-5344