Series GSCU-GMCU-GSVU GMVU-GSCO GMCO
Right Angle Flow Control Valves - BSP/Metric
Swivel Design,
Meter-in, Meter-Out, Needle Orifice,
M5, G1/8 and G1/4,
banjo flow controllers
Nominal diameters dia.
1.5 - 3.5 and 5 mm
These unidirectional and bidirectional flow controllers
have been designed as small
as possible to enable mounting directly
on valves or cylinders.
The flow regulation range is wide and
gradual, allowing the regulation to be very
accurate either at minimum or maximum flow.
unidirectional and bidirectional controller (Meter-Out, Meter-In, Needle Orifice)
Materials
nickel-plated brass body threads - Buna-N seals, Nylon gaskets
Mounting
by male thread
Ports
M5 - G1/8 - G1/4
Installation
in any position
Operating temperature
0 to 80°C (with dry air -20°C) (32°F - 175°F, with dry air -4°F)
Lubricant
compatible with Buna-N (3° - 10° E)
Pneumatic Data
Operating pressure
1 - 10 bar (14.5 - 145 psi)
Nominal pressure
6 bar (87 psi)
Nominal flow
see graph
Nominal diameter
M5 Ø1.5 mm (.059") G1/8 Ø3.5 mm (.137") G1/4 Ø5 mm (.196")
Fluid
filtered air
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
Fittings
Valves
