Bare copper, fine wire conductors to DIN VDE 0295 cl. 5 and/or IEC 60228 cl. 5
Special-PVC conductor insulation
Power supply conductors black with imprint white and ground green-yellow
0,34mm2: white/brown, green/yellow
from 0,5mm2: black with imprint white
shielding of the control conductors in pairs wrapped with plastic aluminium foil, copper drain-wire tinned and tinned copper braided shielding, approx. coverage 85%
Control conductors stranded in pairs and laid up in layers together with the power supply conductors with optimal lay length
Polyester fleece wrapping
verall shielding from tinned copper braid, optimal. coverage min. 85%
Special-PVC outer jacket, gray (RAL 7001)
with meter marking, change-over in 2011
The supply conductors for these cables are ideally combined with the control conductors for the brake function and the thermal protection. Accurately working servomotors require high performance, reliable and durable cables. These requirements are fully met. The cables have an additional total shield for EMC compatibility. The production is based on the specifications of well known servo-drive and control system manufacturers as well as on several VDE standards. EMC = Electromagnetic compatibillity
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided shield
The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.
Brackets ( ) indicate shielding
For linear motors, these cables are also
available with 0.5 mm2 signal conductors
DESINA®: Explanation: see introduction
SIEMENS product designations 6FX 8008-
and 6FX 7008- are registered trademarks
of Siemens AG, and are to be used only
for purpose of comparison
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-677-8942 / 303-680-5159 FAX: 303-680-5344