Safety Against High Bending in Drag Chain / Track Cable Systems, Highly Flexible, Halogen-Free, Shielded, EMI Preferred Type
Sealcon, Inc, European & Domestic cable
Technical
Data
Special drag chain cables
for high mechanical stress
adapted to DIN VDE 0281
part 13, DIN VDE 0282 part
10 and E DIN VDE 0245 and
UL Std. 758, AWM Style 20233
and 20939, conductors according
to UL Style 10522 and 10521
Temperature Range Flexing
-30°C
to +80°C (-22°F
to +176°F)
Fixed Installation
-50°C
to +80°C (-58°F
to +176°F)
Bare copper,
fine wire conductors with short
pitch length
Special
TPE conductor insulation
Color coded
to DIN 47100
Stranding:
< 7 conductors: conductors stranded in
a layer with optimal lay-length
around a filler as per construction
≥ 7 conductors: conductors stranded with
optimal lay-length to bunch-construction
with low torsion strength, optimal
selected short lay-length around
a filler
Special-TPE
inner jacket, extruded as filler
with pressure, gray (RAL 7001)
Shield
of copper braid bare, coverage 85%
max., with optimal pitch
Flame-retardant acc. to VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent to
DIN VDE 0472 Part 804 Test Method
B) vertical
flame test VW1 to UL Std. 758 sec. 42, tested to UL Std. 1581 sec. 1060
Low Adhesion
Halogen-free
High property of alternating
bending strength
High tensile strength, abrasion
and impact resistance at low temperature
Use in multi-shift operations
under extremely high continuous
bending loads
Abrasion resistance
Tear resistance
High stability
Oil resistance
Better chemical resistance
UV and ozone resistance
Higher economical solution
Reduced Ø results low
weight of moving materials
The materials used in manufacture are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers
For
permanent application in
drag chains for long distances,
high and low speed of movements.
These cables are installed
in dry, moist and wet rooms
and in open air with free
movement without tensile
stress or forced movements.
These robust and abrasion
resistant special control
cables are installed
where problems appear for
the application in permanent
stresses e.g. in energy drag
chains, industry robotics,
production lines, automatic
control systems and permanent
movable machinery parts for
multi-shift operation. These
cables are installed every place
where high requirements for
flexibility, abrasion, oxygen
and chemical resistance is
necessary. These shielded
cables are particularly suitable
for the interference-free
transmission on instrumentation
and control engineering applications.
For applications which go beyond
standard solutions, we recommend
our specially designed inquiry
sheet for energy guiding systems.
Before installation, please
read the instructions. For further
technical details see selection
table for drag chain cables. EMI
= Electromagnetic
Interference
To optimize the EMI features
we recommend a large round
contact of copper braiding
on both ends.
=
The
product
is
conformed
with
the
EC
Low-Voltage
Directive
73/23/EEC
and
93/68/EEC.
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344