We can also
have your company name printed on these cables.
Special cables corresponding
to DIN VDE 0250 and 0282 part
Temperature Range -40°C to +80°C
(-40°F to +176°F)
(max. temperature for the outer
Temperature at conductor +90°C/+176°F
Nominal Voltage U0/U
Operating Voltage for
three-phase currents U0/U 413/825
For direct currents U0/U 619/1238
Current Rating to
DIN 57100 part 523/ VDE 0100
Test Voltage 15
min 2.5 kV
Max. permitted Tensile Stress
per mm² conductor
Minimum Bending Radius
Flexing Up to 8 mm conductor Ø min.
3x conductor Ø
Above 8 mm to 12 mm conductor Ø
min. 4x conductor Ø
Above 12 mm conductor Ø min.
5x conductor Ø Fixed Installation Up to 12 mm conductor Ø min.
3x conductor Ø
Above 12 mm conductor Ø min.
In Water: max. +40°C/+104°F,
with limited duration of life
In Air: Flexible
to +80°C (-58°F to +176°F)
-30°C to +80°C (-22°F to +176°F)
Bare copper, fine wire conductors
bunch stranded to DIN VDE 0295
cl. 5, BS 6360 cl. 5 and IEC 60228
Foil as separator
EPR conductor insulation, compound
type 3GI3 to DIN VDE 0207 part
Color code according to DIN
Conductors laying parallel
EPR outer jacket, blue, compound
type 5GM3 adapted to DIN VDE 0207
is a special cable for use as a
connecting and control cable for
submersible motor pumps, underwater
floodlights, floating switch and
has proven its worth for constant
use in waste water or water for
general use up to the depth of
immersion of 500 m (50 bar) and
under temperatures of up to +70°C/+158°F.
Tauchflex-FL can also be installed
for use in dry, damp and humid areas
as well as in the open air.
Not suitable for the installation
in hazardous areas.
Good insulation properties when
submerged in water
Minimal weight gain under water
The mechanical stability of the
insulation materials remain constant
even when submerged
Not suitable for drinking
Cables for use in drinking water
with BAM-certificate on request
(BAM = Bundesanstalt für Materialprüfung
/ Federal Institute for Material
Installation adaptability for
machinery materials of protection
As rotor-connection cable for
motors up to 1000 V with protected
fixed installation in tubes
G = with green-yellow ground conductor
x = without green-yellow ground
AWG sizes are approximate equivalent
values. The actual cross-section
is in mm².
Please note: halogen-free
types available on request.
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.