Radiation Resistance Up to 20x106 cJ/kg
(up to 20 Mrad)
Approvals
Cable
Construction
Tinned or bare copper conductor,
stranded to DIN VDE 0295 cl. 5, BS
6360 cl. 5, HD 383 cl. 5 and IEC 60228
SiR conductor insulation, cross linked
(rubber compound) E I2 to DIN VDE 0207
part 20
Conductor identification to DIN VDE 0293-308
Green-yellow grounding, 3 conductors
and above
Conductors stranded in layers
with optimal lay-length
Outer jacket of cross linked EM9
(rubber compound) to HD 22.3 S3 : 1994
/ A1 : 1999
Jacket color: Black (RAL 9005)
Also available in other jacket colors
Cable Construction H05SST-F
As per H05SS-F
Polyester braiding
Application
Multi conductor cables
insulated and shielded with heat
resistant silicone rubber without
strain relieving elements are used
at high temperatures or with contact
to hot surfaces. These cables are
installed for fixed installation,
mechanically protected, for internal
wiring of lighting fixtures in
industrial application. It is recommended
for the application of the apparatus
which are moving during the operation
with less mechanical stress. =
The product is conformed with the
EC Low-Voltage Directive 73/23/EEC
and 93/68/EEC.
Properties
Behavior in fire: Test of vertical flame-propagation
to DIN VDE 0482 part 265-2-1 and DIN
EN 50265-2-1, not valid for the cables
with polyester braiding (Type H05SST-F)
Advantages: Minimal changes of dielectric
strength and the insulation resistance
also at high temperatures
For laying as a fixed installation
only in open or ventilated pipe systems
as well as in ducts. Otherwise the mechanical
properties of the silicon are reduced
by the enclosed air at temperatures exceeding
+90°C/+194°F. These cables may be damaged
by pulling over sharp-edges or by abrasion
during the installation and application.
To avoid this, it should be treated with
great care during the installation and
application of the cable.
Note
G = with green-yellow grounding
x = without green-yellow grounding
AWG sizes are approximate equivalent
values. The actual cross-section is
in mm².
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
Conduit System
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.
All-weather, Rubber & Welding
Heat-Resistant & Compensating
Silicone Cable
=
The product is conformed with the
EC Low-Voltage Directive 73/23/EEC
and 93/68/EEC.
Circular Connectors (M16, M23, RJ45, M27 and M40)
Industrial Enclosures (Plastic & Metal)
Conduit System
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
Thread Adapters, Enlargers, Reducers
Cable Accessories