Telephone Cables & Fire Warning Cables | J-Y(St)Y Lg Fire | Sealcon

European Part-No.	Description & No. of Pairs x Diameter in mm	Outer Ø (mm)	Cop. Weight kg/km	Weight kg/km	AWG
33035	J-Y(St)Y Lg 1x2x0.8	4.5	11.0	38.0	-
33036	J-Y(St)Y Lg 2x2x0.8	7.0	21.0	60.0	-
33037	J-Y(St)Y Lg 3x2x0.8	8.5	31.0	80.0	-
33038	J-Y(St)Y Lg 4x2x0.8	9.0	41.0	100.0	-
33039	J-Y(St)Y Lg 5x2x0.8	9.5	52.0	120.0	-
33040	J-Y(St)Y Lg 6x2x0.8	11.0	62.0	140.0	-
33041	J-Y(St)Y Lg 8x2x0.8	11.5	82.0	170.0	-
33042	J-Y(St)Y Lg 10x2x0.8	13.2	102.0	220.0	-
33043	J-Y(St)Y Lg 12x2x0.8	14.2	123.0	250.0	-
33044	J-Y(St)Y Lg 14x2x0.8	14.6	145.0	280.0	-
33045	J-Y(St)Y Lg 16x2x0.8	16.0	164.0	320.0	-
33046	J-Y(St)Y Lg 20x2x0.8	17.0	204.0	380.0	-
33047	J-Y(St)Y Lg 24x2x0.8	19.0	244.0	460.0	-
33048	J-Y(St)Y Lg 30x2x0.8	20.8	304.0	560.0	-
33049	J-Y(St)Y Lg 40x2x0.8	23.0	405.0	710.0	-
33050	J-Y(St)Y Lg 50x2x0.8	26.0	505.0	900.0	-
33051	J-Y(St)Y Lg 60x2x0.8	28.0	606.0	1050.0	-
33052	J-Y(St)Y Lg 80x2x0.8	31.5	807.0	1400.0	-
33053	J-Y(St)Y Lg 100x2x0.8	33.0	1008.0	1750.0	-

Technical Data

European

Installation cable according to DIN VDE 0815
Temperature Range
During Operation
-5°C to +50°C (+23°F to +122°F)
Before and After Installation
-30°C to +70°C (-22°F to +158°F)
Loop Resistance
At 20°C (68°F) 73.2 Ohm/km
Nominal Voltage
(Peak voltage) 300³⁾ V
Test Voltage (50 Hz)
Conductor/conductor U eff. 800 V
Conductor/shield 800 V
Insulation Resistance
Min. 100 MOhm x km

Mutual Capacitance at 800 Hz
Max. 100¹⁾ nF/km
Capacitance Unbalances at 800 Hz
K- max. 300²⁾ pF/100 m
Line Attenuation
At 800 Hz 1.1 dB/km
Minimum Bending radius
To DIN VDE 0891 part 5
During delivery
7.5x cable Ø
Single bending without tension
2.5x cable Ø
Repeated bending under tension
7.5x cable Ø
Radiation Resistance
Up to 80x10⁶ cJ/kg (up to 80 Mrad)

Approvals

Cable Construction

Solid plain copper wire 0.8 mm Ø
PVC conductor insulation YI1, to DIN VDE 0207 part 4
Conductors twisted in pairs Pairs stranded in layer
Plastic coated aluminum foil static shielding (St)
Tinned copper drain wire PVC outer jacket YM1, to DIN VDE 0207 part 5
Red PVC outer jacket with imprint Brandmeldekabel

Application

This cable type with electrostatic shielding (St) protects the transmission circuits against extern electrical interferences. Installation cables laid up in pairs are preferable used for indoor telecommunication installation in dry and damp environments in, on and under plaster as well as in the open air for fixed installation on outer walls of buildings.
These cables are suitable for telephone stations and sub-extensions, for signal and data transmission. Telephone-Installation cables are not allowed for purposes of high current and power installation.

= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.

Properties

PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
The materials used in manufacture are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Note

¹) This value may be extended by 20% with a make-up to 4 pairs.
²) 20% of the values, but one value up to 500 pF is allowed.
³) Short time operation (6 s/min) up to 600 V permitted.

Cable Accessories

Coming Soon!

RoHS Compliant Cables & Wires
Telephone and Fire Warning Cables

Sealcon European Telephone Cables & Fire Warning Cables:
J-Y(St)Y Lg

RoHS Compliant Cables & Wires Telephone and Fire Warning Cables

Sealcon European Telephone Cables & Fire Warning Cables: J-Y(St)Y Lg

RoHS Compliant Cables & Wires
Telephone and Fire Warning Cables

Sealcon European Telephone Cables & Fire Warning Cables:
J-Y(St)Y Lg