Silicone Heat Resistant Cables | FZ-LSi/FZ-LS/Neon Light Cables | Sealcon

European Part-No.	Description, Conductor Color & Cross-sec. mm²	Cond. make-up n x wire Ø	Outer Diameter mm	Copper Weight kg/km	Weight ca. kg/km	AWG
23110	FZ-LSi Ignition Cable 16 kV, blue, 0.5	7 x 0.3	5.0	4.8	36.0	20
23106	FZ-LSi Ignition Cable 16 kV, blue, 1.0	19 x 0.25	7.5	9.5	65.0	17
23107	FZ-LSi Ignition Cable 16 kV, blue, 1.5	28 x 0.26	8.5	14.4	88.0	16

European Part-No.	Description, Conductor Color & Cross-sec. mm²	Cond. make-up n x wire Ø	Outer Diameter mm	Copper Weight kg/km	Weight ca. kg/km	AWG
23109	FZ-LS High Voltage Ignition Cable 15/20 kV, red-brown, 1.0	19 x 0.25	5.0	9.6	34.0	17
23108	FZ-LS High Voltage Ignition Cable 15/20 kV, red-brown, 1.0	19 x 0.25	7.0	9.6	60.0	17

European Part-No.	Description, Conductor Color & Cross-sec. mm²	Cond. make-up n x wire Ø	Outer Diameter mm	Copper Weight kg/km	Weight ca. kg/km	AWG
23147	Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.5	30 x 0.25	4.4	14.4	32.0	16
23148	Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.5	30 x 0.25	6.6	14.4	59.0	16
23149	Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.5	30 x 0.25	7.6	14.4	75.0	16

Technical Data

European

FZ-LSi, blue

Test Voltage 20 kV
Breakdown Voltage min. 30 kV
Ignition Voltage (kV eff.)
0.5 mm² = 6 kV
1.0 mm² = 8 kV
1.5 mm² = 10 kV

FZ-LS, red

Test voltage
for 5 mm Ø = 15 kV
for 7 mm Ø = 20 kV
Breakdown voltage
for 5 mm Ø: min. 25 kV
for 7 mm Ø: min. 35 kV

Neon-light-Cable, yellow

Nominal voltage
3.5 kV, 4.0 kV / 7.5 kV
Test voltage 10 kV
Specific volume resistive
min. 10¹² Ohm x cm
Minimum bending radius
approx. 7.5x cable Ø
Radiation resistance
up to 20x10⁶ cJ/kg (up to 20 Mrad)

Approvals

Cable Construction

FZ-LSi, blue

Tinned copper stranded conductor, strand make-up see table below
Silicone conductor insulation 2GI1 to DIN VDE 0207 part 20
Glass-fiber braiding
Outer-jacket silicone 2GM1 to DIN VDE 0207 part 21
Jacket color: Blue

FZ-LS, red

Adapted to ISO 3808 part 1
Tinned copper conductor, 19x0.25 mm Ø
Silicone conductor insulation 2GI1 to DIN VDE 0207 part 20
Jacket color: Red Brown

Neon-light-cable, yellow

in adapted to DIN VDE 0250 part 1 and part 5
Tinned copper stranded conductor 30x0.25 mm Ø
Silicon conductor insulation 2GI1 to DIN VDE 0207 part 20
Jacket color: Yellow

Application

FZ-LSi, blue
This ignition cable is suitable for use at high and extremely alternating temperatures up to +180°C/+356°F and also for motor vehicle sector. As protection against mechanical damages a glass fiber braiding and a silicone jacket covers the conductor insulation.
FZ-LS, red
This ignition cable is suitable for use at high and extremely alternating temperatures up to +180°C/+356°F. Applications include the lamp and lighting industry and cooling and air conditioning technology.
Neon-light-cable, yellow
This cable is primarily suitable for use at high and extremely alternating ambient temperatures such as in the lamp and lighting industry. Protected installation is required.

Properties

Neon-light-cable, yellow

Halogen-free according to VDE 0482 part 267 / DIN EN 50267-2-2/ IEC 60754-2 (equivalent DIN VDE 0472 part 813)
No flame propagation according to DIN VDE 0482 part 265-2-1 / EN 50265-2-1 / IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
No formation of corrosive gases
Low smoke density
Very good weather resistance

Note

AWG sizes are approximate equivalent values. The actual cross-section is in mm².

Cable Accessories

Coming Soon!

RoHS Compliant Cables & Wires
Heat-Resistant Silicone Cables

European Heat-Resistant Cable: FZ-LSi/FZ-LS/Neon Light Cables

Sealcon, Inc, European & Domestic cable

RoHS Compliant Cables & Wires Heat-Resistant Silicone Cables

European Heat-Resistant Cable: FZ-LSi/FZ-LS/Neon Light Cables

Sealcon, Inc, European & Domestic cable

RoHS Compliant Cables & Wires
Heat-Resistant Silicone Cables