Test Voltages for
6/10 kV = 15 kV
12/20 kV = 30 kV
18/30 kV = 45 kV
Minimum Bending
Radius During installation
max. 15x cable Ø
Power Ratings
Table See Technical Information
Code-Designation for
Power Cables with PVC or XLPE Insulation
Design
Identification
of Design
Explanations
Conductor
N
According
to VDE Standard
(No abbreviation for copper conductor)
A
Aluminum conductors
Y
Insulation of thermoplastic
Polyvinyl chloride (PVC)
2X
Insulation cross-linked
Polyethylene (XLPE)
Concentric
Conductor, Shielding
C
Concentric
conductors of copper wires and copper tape,
helically wounded
CW
Concentric conductors
of copper wires in wave conal formation
and and copper tape, helically wounded
CE
Concentric conductors
of copper wires and copper tape over each
individual conductor, helically wounded
Shielding
S
Shielding of copper wires
and copper tape, helically wounded
SE
Shielding of copper wires
and copper tape over each individual conductor,
helically wounded
(F)
Longitudinally water-proof
shielding
Armor
B
Armor of steel tape
F
Armor of galvanized flat
steel wires
G
Counter helix of galvanized
steel tape
Jacket
K
Lead jacket
Outer
Jacket
Y
PVC jacket
2Y
PE jacket
Cable
for U0/U 0.6/1 kV are
additionally designated with
-J
Cables with green-yellow
(green-natural) conductor are marked with
protective conductor
-O
Cables without green-yellow
(green-natural) conductor are marked without
protective conductor
Approvals
Cable
Construction
Circular bare copper-conductor of
stranded wires to HD 383
Inner semi-conducting coating
Conductor insulation of cross-linked
Polyethylene (XLPE), PE-compound
DIX8 to HD 620.1
Outer extrusion of semi-conducting
coating spliced with the insulation
Wrapping of conductive material
Shield: Braiding of copper wires
with one or two tape(s) applied
helically
Wrapping
PVC outer jacket, compound DMV6
to HD 620.1
Jacket color: Red
Application
Suitable
for installation mostly in
power supply stations, indoors
and in cable ducts, outdoors,
underground and in water
as well as for installation
on cable trays for industries,
switch boards and power stations. Due
to the good laying characteristic,
this cable can also be installed
in difficult in difficult
line guide ways.
The inner conducting layer
between the conductor and
the XLPE insulation and the
firmly bonded outer conducting
layer on the XLPE insulation
assures a construction free
of partial discharges with
high operational reliabilities.
Properties
PVC self-extinguishing and flame
retardant according to VDE
0482-332-1-2, DIN EN 60332-1-2 /
IEC 60332-1 (equivalent DIN VDE
0472 part 804 test method B)
The materials used in manufacture
are cadmium-free, contain no
silicone and are free from substances
harmful to the wetting properties
of lacquers
Installation Notes To guarantee an optimum
on operating reliability the extruded
semi-conductive layer is spliced
with the insulation for long duration.
For this reason we recommend a peeling
tool for installation.
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
All-weather, Rubber & Welding
Power Cables, Medium Voltage
Power / Underground Cable & Ground Conductor
