Power Cable, 0.6/1 kV, VDE Approved, with Concentric Copper Conductor
Hi-Tech Controls, Inc, HELUKABEL wires and cables
Helukabel Part-No.
Description & No.
Conductors x cross-sec. mm2
Outer
Diameter
mm
Copper
Weight
kg/km
Weight
ca. kg/km
AWG
32260
NYCWY 0.6/1KV
2X10 re / 10
19.0
312.0
650.0
8
32261
NYCWY
0.6/1KV 2X16 re / 16
21.0
489.0
850.0
6
32262
NYCWY
0.6/1KV 2X25 rm / 25
24.0
763.0
1210.0
4
32263
NYCWY
0.6/1KV 3X10 re / 10
19.5
408.0
730.0
8
32264
NYCWY
0.6/1KV 3X16 re / 16
22.0
643.0
1000.0
6
32265
NYCWY
0.6/1KV 3X25 rm / 16
26.0
902.0
1550.0
4
32274
NYCWY
0.6/1KV 3X25 rm / 25
26.0
1003.0
1600.0
4
32275
NYCWY
0.6/1KV 3X35 sm / 35
27.5
1402.0
1850.0
2
32266
NYCWY
0.6/1KV 3X35 sm / 16
27.0
1190.0
1750.0
2
32276
NYCWY
0.6/1KV 3X50 sm / 50
29.5
2000.0
2450.0
1
32267
NYCWY
0.6/1KV 3X50 sm / 25
29.0
1723.0
2250.0
1
32277
NYCWY
0.6/1KV 3X70 sm / 70
34.0
2796.0
3350.0
2/0
32268
NYCWY
0.6/1KV 3X70 sm / 35
33.0
2410.0
2950.0
2/0
32278
NYCWY
0.6/1KV 3X95 sm / 95
38.5
3791.0
4550.0
3/0
32269
NYCWY
0.6/1KV 3X95 sm / 50
38.0
3296.0
4100.0
3/0
32270
NYCWY
0.6/1KV 3X120 sm / 70
41.0
4236.0
5050.0
4/0
32279
NYCWY
0.6/1KV 3X120 sm / 120
42.0
4786.0
5550.0
4/0
32271
NYCWY
0.6/1KV 3X150 sm / 70
45.0
5100.0
6000.0
300
kcmil
32280
NYCWY
0.6/1KV 3X150 sm / 150
46.0
5970.0
6900.0
300
kcmil
32272
NYCWY
0.6/1KV 3X185 sm / 95
50.0
6383.0
7550.0
350
kcmil
32281
NYCWY
0.6/1KV 3X185 sm / 185
51.0
7363.0
8500.0
350
kcmil
32273
NYCWY
0.6/1KV 3X240 sm / 120
57.0
8242.0
9950.0
500
kcmil
32282
NYCWY
0.6/1KV 4X10 re / 10
20.5
504.0
890.0
8
32283
NYCWY
0.6/1KV 4X16 re / 16
23.5
796.0
1250.0
6
32284
NYCWY
0.6/1KV 4X25 rm / 16
28.0
1142.0
1800.0
4
32285
NYCWY
0.6/1KV 4X35 sm / 16
29.0
1526.0
2050.0
2
32286
NYCWY
0.6/1KV 4X50 sm / 25
33.0
2203.0
2700.0
1
32287
NYCWY
0.6/1KV 4X70 sm / 35
37.0
3082.0
3750.0
2/0
32288
NYCWY
0.6/1KV 4X95 sm / 50
43.5
4208.0
5000.0
3/0
32289
NYCWY
0.6/1KV 4X120 sm / 70
47.0
5388.0
6350.0
4/0
32290
NYCWY
0.6/1KV 4X150 sm / 70
51.0
6540.0
7650.0
300
kcmil
32291
NYCWY
0.6/1KV 4X185 sm / 95
56.0
8159.0
9350.0
350
kcmil
32292
NYCWY
0.6/1KV 4X240 sm / 120
62.5
10546.0
11600.0
500
kcmil
Technical
Data
Helukabel
Power and control cable
to DIN VDE 0276 part 603,
HD 603 S1 and IEC 60502
Temperature
Range Flexing
-5°C
to +50°C (+23°F
to +122°F)
Fixed Installation
-40°C
to +70°C (-40°F
to +158°F)
Permissible Operating Temperature
at conductor +70°C/+158°F
Permissible Short Circuit Temperature
+160°C/+320°F (short circuit duration 5 sec.)
Nominal Voltage U0/U
0.6/1 kV
Test Voltage 4
kV
Max. permissible Tensile
Stress with cable grip
for copper onductor
= 50 N/mm²
Minimum Bending
Radius For single conductor
approx. 15x cable Ø
For multi conductor approx.
12x cable Ø
Power Ratings See Technical
Information
Caloric Load
Values See Technical
Information
Code-Designation for
Power Cables with PVC or XLPE Insulation
Design
Identification
of Design
Explanations
Conductor
N
According
to VDE Standard
(No abbreviation for copper conductor)
A
Aluminum conductors
Y
Insulation of thermoplastic
Polyvinyl chloride (PVC)
2X
Insulation cross-linked
Polyethylene (XLPE)
Concentric
Conductor, Shielding
C
Concentric
conductors of copper wires and copper tape,
helically wounded
CW
Concentric conductors
of copper wires in wave conal formation
and and copper tape, helically wounded
CE
Concentric conductors
of copper wires and copper tape over each
individual conductor, helically wounded
Shielding
S
Shielding of copper wires
and copper tape, helically wounded
SE
Shielding of copper wires
and copper tape over each individual conductor,
helically wounded
(F)
Longitudinally water-proof
shielding
Armor
B
Armor of steel tape
F
Armor of galvanized flat
steel wires
G
Counter helix of galvanized
steel tape
Jacket
K
Lead jacket
Outer
Jacket
Y
PVC jacket
2Y
PE jacket
Cable
for U0/U 0.6/1 kV are
additionally designated with
-J
Cables with green-yellow
(green-natural) conductor are marked with
protective conductor
-O
Cables without green-yellow
(green-natural) conductor are marked without
protective conductor
Approvals
Cable
Construction
Plain copper conductors, as
per VDE 0295 cl. 1 od. cl. 2,
IEC 60228, BS 6360 cl. 1 and
HD 383, solid or stranded versions,
conductor types
10-16 mm² round, solid
conductors (re) alt.
10-25 mm², stranded conductor
(rm),
35-240 mm², sector shaped
conductor, stranded (sm)
PVC conductor insulation, DIV4
to HD 603.1
Color coded to DIN VDE 0293-308
and HD 186
Conductors stranded concentrically
Filling compound
Concentric conductor (Ceander),
inner layer of corrugated copper
wires, outer layer with copper
tape
PVC outer jacket, DMV5 to HD
603.1
Jacket color: Black
Application
Power
cables for energy supply
are used for industry and
distribution boards, power
stations, house connecting
boxes and street lighting
as well as control cable
for the transmission of
control impulses and test
data.
Overall, where increased
electrical and also mechanical
protection are required.
Those cables are installed
in open air, in underground,
in water, indoors and in
cable ducts.
The concentric conductor
(C) is allowed to use as
PE-, PEN-conductor or as
shield.
due to the typical construction
of concentric conductors
it is possible to obtain
many more cable joints, without
cutting any conductor. In
that way the operating reliability
is guaranteed. =
The
product
is
conformed
with
the
EC
Low-Voltage
Directive
73/23/EEC
and
93/68/EEC.
Properties
PVC self-extinguishing and
flame retardant according to
VDE 0482-332-1-2, DIN EN
60332-1-2 / IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method
B)
The materials used in manufacture
are cadmium-free, contain no
silicone and are free from substances
harmful to the wetting properties
of lacquers
Highest
permissible voltage
Direct
current systems 1.8 kV
Alternating
current systems,
single-phase systems 1.4 kV
Both conductors insulated,
single-phase systems 0.7 kV
One conductor grounded,
three-phase systems 1.2 kV
With concentric conductor and
a cross-section of 240 mm²
and above 3.6 kV
Note
At 25 mm² = round cables
are more compact thus smaller
conductor Ø
Available with outer jacket in
alternative colors on request.
re = round solid
conductor rm =
stranded
conductor sm =
sectional
conductor
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
Conduit System
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.
All-weather, Rubber & Welding
Power Cables, Medium Voltage
Power / Underground Cable & Ground Conductor
=
The
product
is
conformed
with
the
EC
Low-Voltage
Directive
73/23/EEC
and
93/68/EEC.
Circular Connectors (M16, M23, RJ45, M27 and M40)
Industrial Enclosures (Plastic & Metal)
Conduit System
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
Thread Adapters, Enlargers, Reducers
Cable Accessories