Tie-rod for assembling, Series MC
(Kit G)
4 screws - 4 washers/spacers - 2 o-rings
** See example at right. KIT "G" is to be used whenever there is a second
regulator or filter-regulator in the same common assembly.
KIT "G" allows
the component to the left of the second regulator to be assembled onto
the second regulator on its right side and also back into the component
or tie-rod KIT to its left side.
You must remove the outer plastic shell or
cover of that middle component in order to assemble the bushings and
cap-screws of Kit "G" both to the left and right.
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
Fittings
FRL Units - Filters, Regulators & Lubricators
** See example at right. KIT "G" is to be used whenever there is a second
regulator or filter-regulator in the same common assembly. 
