Hi-Tech Controls Blog Your One Stop Solution For Cable & Wire Accessories
Cables & WiresEnclosures (Plastic & Metal)CAMOZZI PneumaticsLiquid Tight Strain Relief FittingsCircular ConnectorsConduit System (Tubing, Fittings, etc.)Accessories & Adapters, Reducers, Enlargers

About Hi-Tech Controls

Hi-Tech Controls Inc. is your one stop source for wires and cables requiring RoHS, UL, CSA, Harmonized and CE approvals. We offer cables for Power, Control, High/Low Temperature, Hi-Flex, Robotic, Drag Chain, Servo, VFD, Composite, Ribbon, Data (CAT), Single Conductor, and more. We also offer a large selection of Camozzi Pneumatics and industrial enclosures.

Request Catalogs/Samples

Click: Quote / Information Request Page

Or Call: 1-800-677-8942

UL Approved Weatherproof Cable Junction Boxes

UL Approved “Weatherproof” Hensel Cable Junction Boxes. Manufactured for Outdoor Installations. UL & CSA Approval.

• This Polycarbonate Enclosure is suitable for outdoor installation.

• Resistant to occasional cleaning procedures (direct jet) with high-pressure cleaner without additives, water pressure: max. 100 bar, water temperature: max. 80°C , distance => 0.15 m, in accordance with the requirements IP 69K, enclosure and cable glands at least IP65

• Ambient Temperatures: Average value over 24 hours  131°F (55°C) Maximum value 158°F (70°C) Minimum value -13°F (-25°C)

• IK08 (5 Joule) degree of protection against mechanical load.

• Fire protection in the event of internal faults: Demands placed on electrical devices from standards and laws  Minimum requirements – Glow wire test in accordance with IEC 60 695-2-11: 650°C for boxes and cable glands. 850°C for parts of insulating material necessary to retain current carrying parts in position.

• Fire protection in the event of specific risks or hazards: Demands placed on electrical installations and devices in areas and facilities subject to fire risk, e.g. DIN VDE 0100 Part 482, official regulations, VdS directives Minimum requirements – Glow wire test to IEC 60 695-2-11: 850°C for boxes and cable glands. 850°C for cavity wall installation – Use of Fire resistant cables.

• Burning Behavior: Glow wire test IEC 60 695-2-11: 960°C UL Subject 94 V-0. Flame resistant & Self extingushing.

• Toxic behavior: Halogen-free, silicone-free. “Halogen-free” in accordance with the examination of the cables and insulated wires – corrosiveness of fumes – as per IEC 754-2

Available in 5 sizes

Our products are used in the following industries and areas of application:

  • Companies involved in the processing of metal, wood, paper & cement factories
  • Agricultural and food industries
  • Water treatment and sewage plants, power stations and cold-storage depots
  • Leisure and commercial centers
  • Banks and insurance buildings
  • Hotel and cinema complexes
  • Hospitals and clinics
  • Schools and universities
  • Stadiums and sports centers
  • Gas stations and traffic infrastructure in ports, underground stations, tunnel and road construction
  • Indoor and outdoor installations