Series PSCU - PMCU - PSVU - PMVU - PSCO -PMCO
Composite Flow Regulators with Banjo
Flow Control Valves,
Composite Flow Regulators with Banjo
Unidirectional and Bidirectional (Meter-out, Meter-in, Needle Orifice)
Ports G1/8, G1/4, G3/8 with metric mm O.D. tube connections
These unidirectional and bidirectional flow regulators are supplied complete with banjo and O-ring thread seal.
SCU, MCU = Assembly directly on the cylinders
SVU, MVU = Assembly directly on the valves
SCO , MCO = Assembly directly on the cylinders or valves
Technical Specifications
Construction
needle type
Valve group
unidirectional and bidirectional controller (Meter-out, Meter-in, Needle Orifice)
Materials
Nickel-plated brass body, regulation screw, collet and insert; technopolymer: banjo and controller; NBR seals
Mounting
by male thread
Ports
G1/8 - G1/4 - G3/8
Installation
in any position
Operating temperature
0°C - 60°C (with dry air -20°C) (32°F - 175°F, with dry air -4°F)
Operating Pressure
1 - 10 bar
Nominal Pressure
6 bar
Nominal Flow
See graph
Nominal Diameter
G1/8 = 2 mm, G1/4 = 4 mm, G3/8 = 7mm
Fluid
Filtered Air, 25 micron or less
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
7374 S. Eagle Street
Centennial, CO 80112-4221 USA
Toll Free: 800-456-9012 / 303-699-1135 FAX: 303-680-5344
Fittings
Valves
