Special Neoprene-flat cable
to DIN VDE 0250 part 809
Temperature Range Flexing
-25°C to
+60°C (-13°F to
+76°F)
Fixed Installation
-40°C
to +80°C (-40°F to
+176°F)
Nominal Voltage U0/U
300/500 V
Test Voltage 3000
V
Minimum Bending Radius 10x cable thickness
Radiation Resistance up to 50x106 cJ/kg (up
to 50 Mrad)
Approvals
Cable
Construction
Bare copper, stranded to DIN VDE
0295, BS 6360 cl. 5 and IEC 60228,
fine or extra fine wire stranded
according to different cross-sections
1 to 25 mm² - class 6, col.
4
35 to 95 mm² - class 5
Special rubber conductor insulation
GI1, to DIN VDE 0207 part 20
Conductor identification up to 5 conductors,
color code to DIN VDE 0293
7 conductors and above with number printing
Conductors laying parallel
Part. No. 28007 and 28013 cable
structure 6x4
Green-yellow grounding
Special rubber outer jacket 5GM2,
to DIN VDE 0207 part 21
Color: Black
Application
Neoprene
type of flat cables are used mainly
as trailing cable for crane installations,
floor conveyer systems and shelf
control units.
These cables are also available for
export with UL-approval.
Installation
notes: Cables reels with flat cables
must be transported in standing position
on the flange. A bending flexibility
can be achieved on a plane surface.
For this purpose, the corresponding
fitting instructions should be followed.
Put the
cable trolley on the guiding
rail or upon carrier beam and
push them together at the starting
point. The distance between
the bedding surface of two
cable trolleys must be wider
than the double thickness of
a cable-packet.
During
the packaging performance,
it must be started with the
smaller cross-section which
lays on the bedding surface
and will be built successively
so that the biggest cross-section
is laying on the top.
Further, be careful of a symmetrical
load distribution.
In case
of multi conductor flat cables with
small cross-section, smaller
than 2.5 mm², is very critical
due to its low tensile stress.
In such case, you should add
10% reserve wire for calculation.
= The product
is conformed
with the
EC Low-Voltage
Directive
73/23/EEC
and 93/68/EEC.
Properties
Special rubber outer jacket, cold-resistant
Extensively oil resistant
For chemical resistance, see table technical
information
Extremely small bending radius
High flexibility
Minimum waste of space
Packaging possibility
Test according to VDE 0482-265-1-2, DIN EN 60332-1-2 / IEC 60332-1
(equivalent DIN VDE 0472 part 804 test
method B)
Note
G = with green-yellow grounding
x = without grounding
AWG sizes are approximately equivalent
values. The actual cross section is
in mm2
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
Conduit System
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.
All-weather, Rubber & Welding
Flat & Ribbon Cables
Flat Cables & Ribbon Cables in PVC
= The product
is conformed
with the
EC Low-Voltage
Directive
73/23/EEC
and 93/68/EEC.
Circular Connectors (M16, M23, RJ45, M27 and M40)
Industrial Enclosures (Plastic & Metal)
Conduit System
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
Thread Adapters, Enlargers, Reducers
Cable Accessories