Special drag chain cables
for high mechanical stress
in adapted DIN VDE 0281
part 13, DIN VDE 0282 part
10 and E DIN VDE 0245 and
UL Std. 758 AWM Style 20939
Temperature Range Flexing
to +105°C (-22°F
to +105°C (-58°F
-30°C to +80°C (-22°F
to +80°C (-58°F
Radiation Resistance Up
to 100x106 cJ/kg
(up to 100 Mrad)
fine wire conductors with short
TPE conductor insulation
with continuous white numbering
grounding (3 conductors and above)
> 7 conductors: conductors stranded in
a layer with optimal lay-length
around a filler as per construction
= 7 conductors: conductors stranded with
optimal lay-length to bunch-construction
with low torsion strength, optimal
selected short lay-length around
inner jacket, extruded as filler
with pressure, gray RAL 7001
of copper braid bare, coverage 85%
max., with optimal pitch
Pine Green (RAL 6028)
approved HELUKABEL® MULTISPEED® 500-PUR are installed where the extreme requirements
for the cables are necessary.
Designed for the export-oriented
machinery manufacturer, specifically
for the USA and Canada. The
selected materials and lay-up
technique permit these high
flexible cables for permanent
application in drag chains
for long distances, high
and slow speeds.
These cables are installed
in dry, moist and wet rooms
and in open air with free
movement without tensile
stress or forced movements.
These robust and abrasion
resistant special control
cables are installed where the problems appear
for the application in permanent
stresses e.g. in energy drag
chains, industry robotics,
production lines, automatic
control systems and permanent
movable machinery parts for
multi-shift operation. These
cables are installed every place
where high requirements for
the flexibility, abrasion,
oxygen and chemical resistance
Theses shielded cables are
particularly suitable for interference-free
transmission in instrumentation
and control engineering applications.
Before installation in cable
trays, please read the instructions.
For further technical details, see
selection table for drag chain
cables. EMI =
To optimize the EMI features
we recommend a large round
contact of copper braiding
on both ends.
PUR-jacket flame retardant according
to DIN VDE 0482332-1-2, DIN EN 60332-1-2 / IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method
B), VW1, FT1
High resistance to mechanical
Long life durability due to low
High tensile strength, abrasion
and impact resistance at low temperature
Better chemical resistance
UV and ozone resistance
Higher economical solution
Reduced Ø, results low
weight of moving materials
The materials used in manufacture
are cadmium-free, contain no
silicone and are free from substances
harmful to the wetting properties
G = with
x = without green-yellow earth
AWG sizes are
approximate equivalent values.
The actual cross-section is in
is the Exclusive Importer of HUMMEL products. We offer over 6,000 different Types and Sizes of RoHS Compliant Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, Circular Connectors, Conduit System, Industrial Enclosures and Other Related Cable Management Products which are rated the best in the industry.
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands Threads: PG, NPT, Metric, BSPP Threads Materials: Nylon, Nickel Plated Brass, PVDF (for chemicals and extreme temperatures) & Stainless Steel,
NEMA 4x and 6 (IP68, IP 69K). Approvals: RoHS, Deca BDE, UR, UL, CE, CSA, VDE, German Lloyd, etc. UL f1 (UL 746C) - Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C
Circular Connectors (M16, M23, RJ45, M27 and M40) Sizes: M16 Signal, M23 Signal & Power, M27 Signal, M40 Power, M12/16 Twintus Types: Twintus, RJ45 Industrial Ethernet, PoE Fast Ethernet, Push-Pull, Stainless Steel, Over Molded Cordsets, Standard/EMI Ready Configurations: Signal (3-28 pole) & Power (6 & 8 pole) Materials: Nickel Plated Brass, Stainless Steel and Aluminum Approvals: RoHS, Deca BDE, UR, UL, CSA, TÜV, etc.
Industrial Enclosures (Plastic & Metal) Materials: Polycarbonate, ABS (Acryl-Butadiene-Styrene), Aluminum, Steel/Stainless Steel and Polyester. Types: Gray or Transparent Lids, available with Hinges and Latches, Plain Walls or Knockouts. Approvals: RoHS, Deca BDE, UL, CSA, TUV and CE.
Modular, Expandable, UV and Impact Resistant, NEMA 4, 4x (IP 66/67). Solar Plus for Photovoltaic applications.
Our Enclosures can be equipped with Strain Relief Fittings, Circular Connectors or Conduit Fittings. Other customization options like cutting & drilling are also available.
High Pull-Out Resistance, Robust Performance, Long Life Expectancy, Fastest/ Easy installation, No Tools required!
Fittings: Push-In, Turn-to-Seal, Snapclic DUO (Nylon or Nickel Plated Brass), Double-Seal, Flange/Bulkhead
Conduit: Standard and Super Flex Corrugated Conduit Accessories: Snap-In Mounting Brackets. NEMA 4 (IP 54/65) Approvals: RoHS, Deca BDE, UR, German Lloyd, CE, etc.
Hazardous Location / Explosive Proof Cord Grips, Cable Glands
These fittings are labeled and approved to withstand the required needs of a combustible environment. Materials: Nylon, Nickel Plated Brass, PVDF (chemical resistant & extreme temperatures), Stainless Steel. Threads: NPT, Metric & PG. NEMA 4x (IP 67) and 6 (IP 68/69K)
Approvals: RoHS, Deca BDE, UL, CSA, VDE, CE, EEx e, ATEX, German Lloyd, IECEx,
Ex-d/Ex-e, Ex-i EXIOS - High-end Cable Glands for armored cables in hazardous areas including the latest IECEx and ATEX certifications, for use in Ex-e, Ex-d and Ex-tD areas
Thread Adapters, Enlargers, Reducers
Convert, Increase or Decrease your thread size with our newest product line of Adapters, Enlargers and Reducers. Threads: NPT, Metric and PG. Materials: Black or Gray Nylon, Nickel Plated Brass, Aluminum, Stainless Steel. Approvals: RoHS, Deca BDE, CE, EEe x, ATEX, etc.
Hazardous / Explosive proof versions available.